A Supplement Facts label tells you what is in the bottle, how much you get per serving, and how that compares with a reference Daily Value. Reading it in a fixed order, from the serving size down to the fine print, takes about two minutes and exposes most of what a glossy front label is designed to hide.
Key takeaways
- Start with the serving size. Every amount on the panel refers to that serving, which may be two, three, or more capsules.
- Percent Daily Value (%DV) is a label reference, not a personal target or a safety ceiling. FDA treats 5% DV or less as “low” and 20% DV or more as “high.”
- An asterisk with “Daily Value not established” is routine for herbs and specialty ingredients, not a quality signal.
- A proprietary blend must show total weight and descending order, but the regulation does not require the amount of each ingredient inside it.
- FDA does not approve supplements or their structure/function claims before sale; the “has not been evaluated” disclaimer is mandatory.
How to read a supplement facts label: what the law requires it to show
Under FDA’s Dietary Supplement Labeling Guide, five statements are required: a statement of identity (the product name), the net quantity of contents, the Supplement Facts panel, an ingredient list, and the name and place of business of the manufacturer, packer, or distributor. The first two go on the front; the rest usually sit on the information panel.
The Supplement Facts panel is governed by a specific regulation, 21 CFR 101.36; most of the front of the bottle is not. The steps below follow the panel top to bottom, then move to the claims and fine print around it. For related guides on certifications and research literacy, see our Supplement Buying Guides.
Step 1: Read the serving size and servings per container
The first two lines are the easiest to skip and the most consequential. FDA’s nutrition labeling guidance defines a serving as the maximum amount the label recommends per eating occasion; if no recommendation is given, one tablet, capsule, or softgel is the serving. Every amount and %DV below refers to that serving, not to a single pill.
A product that advertises an impressive amount “per serving” may define a serving as three capsules taken twice daily. Divide servings per container by the servings you would actually take each day to learn how long the bottle lasts.

Step 2: Work through the ingredient rows and their units
Ingredients with established Daily Values appear first in a fixed order: vitamin A, vitamin C, vitamin D, vitamin E, vitamin K, thiamin, and so on through the minerals, each in the unit of its Daily Value. The regulation allows the source to follow in parentheses, preceded by “as” or “from,” as in “Calcium (as calcium carbonate).” The amount shown is the weight of the nutrient itself, not the weight of the salt it came from.
Micrograms, milligrams, and international units
Vitamin D is declared in micrograms (mcg) on U.S. labels, often with international units (IU) alongside. According to the NIH Office of Dietary Supplements, 1 mcg of vitamin D equals 40 IU, so a 25 mcg softgel is a 1,000 IU softgel. The same fact sheet lists the adult Daily Value as 20 mcg (800 IU), the RDA for adults 19 to 70 as 15 mcg (600 IU), and the Tolerable Upper Intake Level for adults as 100 mcg (4,000 IU). If you are weighing the two forms, our guide to vitamin D3 versus D2 explains how they differ. The source form matters for minerals too: “Magnesium (as magnesium oxide)” declares elemental magnesium, but oxide, citrate, and glycinate differ in absorption and gut tolerance, as our comparison of magnesium forms explains.
Step 3: Interpret the %DV column correctly
FDA’s Daily Value reference page defines %DV as “how much a nutrient in a single serving of an individual packaged food or dietary supplement contributes to your daily diet,” with a rule of thumb: 5% DV or less per serving is low, and 20% DV or more is high. The page lists current adult Daily Values, including 90 mg for vitamin C, 1,300 mg for calcium, 18 mg for iron, 420 mg for magnesium, and 11 mg for zinc.
Daily Value is not your RDA, and it is not a ceiling
Three reference numbers get mixed up constantly. The NIH ODS Nutrient Recommendations page explains that the Recommended Dietary Allowance is the average daily intake sufficient for nearly all (97 to 98%) healthy people and varies by age and sex; the Tolerable Upper Intake Level (UL) is the maximum daily intake unlikely to cause adverse effects; and the Daily Value is a single number per nutrient chosen by FDA for labels that “is often, but not always, similar to one’s RDA or AI for that nutrient.”
So 500% DV is not automatically unsafe, and 100% DV is not automatically what you need. The useful question is where the per-serving amount sits relative to the UL in the relevant NIH fact sheet, especially for fat-soluble vitamins and minerals such as iron.
The asterisk and “Daily Value not established”
Below the vitamins and minerals, ingredients carry a symbol, usually an asterisk, and a footnote reading “Daily Value not established.” Under 21 CFR 101.36, that is exactly how botanicals, amino acids, probiotics, and other ingredients without a Daily Value must be shown. It means no reference intake exists, nothing more.
Step 4: Decode proprietary blends
This is where labels most often fail the reader. Paragraph (c) of 21 CFR 101.36 requires that a blend’s ingredients “be declared in descending order of predominance by weight” and that the amount on the blend line be “the total weight of all other dietary ingredients contained in the proprietary blend.” Ingredients with a Daily Value must still be listed separately with their own amounts. What the regulation does not require is the weight of each individual ingredient inside the blend.
In practice, a 1,200 mg “Performance Matrix” with six ingredients tells you only that the first weighs at least as much as the second. The first could be 1,100 mg and the last a trace. You cannot tell whether any component is present at an amount studied in research, and for most ingredients the dose is the whole question. That is editorial analysis rather than a regulatory judgment, but it is the most common reason we treat a large blend as a reason to look elsewhere.
Botanicals and extracts
The regulation says botanicals must be listed by common or usual name and must “specify the part of the plant from which the ingredient is derived,” such as root, leaf, or fruit. FDA’s guidance adds that a dried extract is declared by the weight of the extract, while a liquid extract is declared with the ratio of starting plant material to solvent and the solvent named. A label that gives plant part, extract ratio, and any standardization to a marker compound is giving you far more than one that lists only a plant name.
Step 5: Read the “Other ingredients” line
Directly below the panel is the ingredient statement. FDA’s ingredient labeling guidance says it is headed “Other Ingredients” when some ingredients already appear as sources in the panel, and that items are listed in “descending order of predominance by weight.” Here you find capsule material (gelatin or plant cellulose), fillers, flow agents, colors, sweeteners, and preservatives; certified colors must be named, such as “FD&C Red No. 40.” Check for gelatin if you avoid it, for allergens, and for whether a long excipient list explains why the serving is three large tablets rather than one.
Step 6: Separate the claims from the facts
Now look at the wording on the front and sides. FDA’s page on label claims describes three categories. Health claims link a substance to reduced disease risk and require FDA authorization. Nutrient content claims describe the level of a nutrient; per the labeling guide’s chapter on claims, “high” means at least 20% of the Daily Value per serving and “good source” means 10 to 19%. Structure/function claims describe a role in maintaining normal body function, such as “supports immune health.”
Structure/function claims are the ones you see most, and they are “not subject to premarket review and authorization by FDA.” The manufacturer must notify FDA within 30 days of first marketing the product and must print the disclaimer in its exact wording: “This statement has not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.” Its presence tells you the claim was never reviewed; its absence next to a benefit claim is a labeling violation. A claim that a product treats, prevents, or cures a condition goes further: FDA’s FDA 101 consumer update states that “a product intended to treat, prevent, cure, or alleviate the symptoms of a disease is a drug.” For a method of weighing the evidence behind any claim, see our reader’s guide to evaluating supplement research.
Step 7: Check warnings, company details, and dates
Some warnings are mandatory. 21 CFR 101.17(e) requires any solid oral supplement containing iron to state: “WARNING: Accidental overdose of iron-containing products is a leading cause of fatal poisoning in children under 6,” with instructions to keep it from children and call a doctor or poison control center in case of overdose. Other cautions about pregnancy, medications, or conditions are voluntary; their presence usually reflects a more careful manufacturer rather than a riskier product. Confirm the required company name and address, and look for a lot number and expiration date, which you would need to report a problem or check a recall. If you take medication, our overview of supplement and medication interactions covers the combinations most worth raising with a pharmacist.
Step 8: Look for a third-party mark, and know its limits
FDA “does NOT have the authority to approve dietary supplements for safety and effectiveness” before sale, as the agency puts it. Manufacturers must follow good manufacturing practices, and 21 CFR 111.75 requires at least one test to verify the identity of each dietary ingredient, but finished-batch testing may cover a statistically chosen subset of batches rather than every one.
That gap is why independent seals exist. The NIH Office of Dietary Supplements notes that products passing tests from organizations such as U.S. Pharmacopeia, NSF International, and ConsumerLab.com can display a seal indicating they were properly manufactured, contain the listed ingredients, and do not contain harmful contaminant levels, adding that “These seals do not guarantee that a product is safe or effective.” Our guide to third-party tested supplements and what the seals mean compares the programs. “Lab tested” printed by the brand itself, with no certifier you can look up, is not the same thing.
| Label element | What it tells you | What to check |
|---|---|---|
| Serving size and servings per container | The dose all amounts and %DVs refer to; how long the bottle lasts | Units per serving; servings per day in the directions |
| Ingredient rows (amount and unit) | Elemental amount per serving; source form in parentheses | mcg vs. mg vs. IU; the chemical form (e.g., oxide vs. glycinate) |
| %DV column | Share of FDA’s label reference value; 5% is low, 20% is high | Compare high doses against the UL in the NIH ODS fact sheet |
| Asterisk / “Daily Value not established” | No reference value exists for this ingredient | Normal for herbs and specialty compounds; not a quality signal |
| Proprietary blend | Total blend weight and descending order only | Whether individual amounts are disclosed; if not, dose cannot be evaluated |
| Botanical entries | Plant name, plant part, extract ratio or standardization | Plant part named; extract ratio or marker compound given |
| Other ingredients | Capsule material, fillers, colors, sweeteners, preservatives | Allergens, gelatin, dyes, ingredients you avoid |
| Claims and disclaimer | Structure/function claims are not FDA-reviewed | Disclaimer present; no treatment or cure language |
| Warnings, company, lot, expiration | Required iron warning; who is responsible; traceability | Named company with address; lot number and date present |
| Certification mark | Independent verification of contents and contaminants | Named certifier (USP, NSF, Informed Sport, etc.) you can look up |
Red flags worth taking seriously
Some of these are regulatory violations; others are editorial judgments about where risk concentrates.
- Disease language. “Treats,” “cures,” “prevents,” or “reverses” a named condition is a drug claim on a product never reviewed as a drug.
- A benefit claim with no disclaimer. The FDA disclaimer is mandatory alongside structure/function claims.
- Large proprietary blends. Doses cannot be evaluated, and the first ingredient may account for nearly all the weight.
- High-risk categories. A 2018 analysis in JAMA Network Open of 776 products named in FDA warnings from 2007 to 2016 found 45.5% were marketed for sexual enhancement, 40.9% for weight loss, and 11.9% for muscle building, with hidden drugs including sildenafil, sibutramine, and synthetic steroids. USADA advises extreme caution with exactly these three categories.
- “All natural” as proof of safety. The NIH ODS reminds readers that natural “doesn’t always mean safe,” citing comfrey and kava as examples that can harm the liver.
- Missing basics or vague testing language. No company address, lot number, or expiration date, or “third-party tested” with no named certifier, leaves nothing you can verify.
Bottom line
Knowing how to read a supplement facts label is mostly a matter of reading it in order and knowing what each line is allowed to mean. The serving size anchors every number. The %DV column is a comparison tool, not a target or a limit. The asterisk is routine, the proprietary blend is a disclosure gap, and the disclaimer is a reminder that front-label claims were never reviewed. None of this tells you whether a supplement will help you; that depends on the evidence for the ingredient at the dose provided. It does tell you whether the label gives you enough to make that judgment. Our editorial policy explains how we apply the same standards in our guides, and our article on reading omega-3 labels for EPA and DHA is a worked example of how a “total fish oil” number can differ sharply from the omega-3s you actually get.
Frequently asked questions
What is the difference between a Supplement Facts label and a Nutrition Facts label?
Conventional foods carry a Nutrition Facts panel, while dietary supplements carry a Supplement Facts panel governed by 21 CFR 101.36. The supplement version lists ingredients with and without Daily Values, allows source ingredients in parentheses, permits proprietary blends, and uses the “Daily Value not established” footnote. Both use the same Daily Value reference numbers.
Does 100% Daily Value mean I am getting the right amount?
Not necessarily. The Daily Value is a single label reference per nutrient chosen by FDA, and the NIH ODS notes it is “often, but not always, similar” to the RDA. Your needs depend on age, sex, diet, and health status. Compare the per-serving amount with the RDA and the Tolerable Upper Intake Level for your group in the relevant NIH fact sheet.
Is a product with an asterisk next to an ingredient lower quality?
No. The asterisk and “Daily Value not established” footnote are required by regulation for any dietary ingredient without an FDA Daily Value, including herbs, amino acids, probiotics, and compounds such as coenzyme Q10. It describes the ingredient category, not the product’s quality.
Why don’t proprietary blends list the amount of each ingredient?
Because the regulation does not require it. 21 CFR 101.36(c) requires the total weight of the blend and its ingredients in descending order by weight, but not individual amounts for ingredients without Daily Values. Manufacturers often cite formula confidentiality. For the reader, the result is that the dose of each component cannot be evaluated from the label.
How do I convert IU to mcg for vitamin D?
According to the NIH Office of Dietary Supplements, 1 mcg of vitamin D equals 40 IU. Divide IU by 40 to get micrograms, or multiply micrograms by 40 to get IU; a 50 mcg product is a 2,000 IU product. Vitamins A and E use different conversion factors, so check the relevant NIH fact sheet for those.
What does the FDA disclaimer on a supplement actually mean?
It means the structure/function claim next to it was never reviewed by FDA before the product went on sale. The manufacturer is responsible for having evidence that the claim is truthful and must notify FDA within 30 days of marketing, but no agency evaluated the claim in advance. The disclaimer is mandatory and must appear in its exact wording.
Does “GMP certified” on a label mean the product was tested?
Not by itself. Current good manufacturing practice rules apply to the facility and its processes. 21 CFR 111.75 requires identity testing of each dietary ingredient, but finished-batch testing can be done on a statistical subset of batches. A product-level certification from a named third party, such as USP or NSF, is the only label mark that reflects independent testing of the finished product.
Where do I report a problem with a supplement?
FDA asks consumers who have a bad reaction to stop taking the product, seek medical care, and report it through its online reporting page or by calling 1-888-INFO-FDA. Keep the bottle so you can supply the lot number and the manufacturer’s contact details from the label.
Sources
- Dietary Supplement Labeling Guide: Chapter I. General Dietary Supplement Labeling — U.S. Food and Drug Administration, 2005.
- Dietary Supplement Labeling Guide: Chapter IV. Nutrition Labeling — U.S. Food and Drug Administration, 2005.
- Dietary Supplement Labeling Guide: Chapter V. Ingredient Labeling — U.S. Food and Drug Administration, 2005.
- Dietary Supplement Labeling Guide: Chapter VI. Claims — U.S. Food and Drug Administration, 2005.
- 21 CFR § 101.36 Nutrition labeling of dietary supplements — Legal Information Institute, Cornell Law School (current CFR text).
- 21 CFR § 101.17 Food labeling warning, notice, and safe handling statements — Legal Information Institute, Cornell Law School (current CFR text).
- 21 CFR § 111.75 What must you do to determine whether specifications are met? — Legal Information Institute, Cornell Law School (current CFR text).
- Daily Value on the Nutrition and Supplement Facts Labels — U.S. Food and Drug Administration, 2024.
- Label Claims for Conventional Foods and Dietary Supplements — U.S. Food and Drug Administration.
- FDA 101: Dietary Supplements — U.S. Food and Drug Administration.
- Vitamin D: Fact Sheet for Health Professionals — National Institutes of Health, Office of Dietary Supplements.
- Nutrient Recommendations and Databases — National Institutes of Health, Office of Dietary Supplements.
- Dietary Supplements: What You Need to Know — National Institutes of Health, Office of Dietary Supplements, 2023.
- Unapproved Pharmaceutical Ingredients Included in Dietary Supplements Associated With US Food and Drug Administration Warnings — Tucker J, et al., JAMA Network Open, 2018.
- Supplement Connect — U.S. Anti-Doping Agency.